CPW-312AF: Fully Automatic - Vertical Tripod Turnstile
The tripod turnstile stops and releases the pedenstrians by rotating the arms. Bi-direction passing; lift arm automatically; rotate automatically; intelligent detection. It can effectively control only one person to pass at a time . With much higher safety and reliability, it can fit the harsh outdoor environment well.
The passage width is normally restricted within 550mm and transit speed is relatively slower.So it is suitable for ordinary pedestrians without lugguge or occasions with small flow of pedestrains.
■ Passing mode: 【controlled mode】/【free mode】/【forbidden mode】(The entry and exit can be set independently)
■ Auto-drop-arm function: Use the advanced mechanical structure create by CMOLO, the arm can drop down automatically when power off (default), or free pass-ing mode without dropping arm when the power off, it’s convenient to make evacua-tion and accord with the fire-fighting requirement.
■ Unique dynamic monitoring function
■ Batch setting and debug function: The turnstile can be batch set and debugged by the software. It will greatly improve the working efficiency and reduce the maintenance cost.
■ Compatibility: Equipped with the dry contact signal input interface,
Compatible with all kinds of access controllers
■ Auto-drop-arm function: The arm will drop automatically when power off (default), and free pass mode without dropping arm is optional.
■ Anti-bump function: Can bear a safety margin impulse force when the arms are locked, overtop the safety scale, the arms can push forward slowly, to protect the mechanism and pedestrian.
■Emergency-escape function: With the Emergency-escape controller, the systems will drop down the arms automatically, and it is convenient to evacuate the people.
|Normal passing||25 ~ 35 people / min(according to the condition of pedestrians)|
|Evacuate passing||60 people/min(according to the condition of pedestrians)|
|Driving motor||DC brushless motor|
|Method of position||Use the encoder to make sure the swing gate position|
|Method of motor control||Using high-performance DSP chip|
|Control input/output||6 channels relay control output/ 8-channel dry contact signal input|
|Housing material||304 grade stainless steel|
|Surface treatment||Brushed finish|
|Arms material||304 grade stainless steel|
|Communication interface||RS485 / RS232；TCP/IP interface(customizable)|
|Length Of Arm:||510(mm)|
|Working Environment:||Indoors & Oudoors|